2-way Bass reflex Active speaker - 12" + 1" - 700Wrms+200Wrms

Artnr. 703501

Flera modeller tillgängliga

The FBT VENTIS 112A has been designed to meet the highest standards in both performance and aesthetic appeal. The FBT VENT IS are as suitable for fixed installation as they are for use on the stage. The FBT VENTIS 112A incorporating a 12″ LF woofer with 2.5″ voice coil, custom made for FBT and 1″ exit throat B&C HF compression driver with 1 .4″ voice coil; a fully rotatable constant directivity horn ensure accurate coverage (80° H x 50° V). With a frequency range from 48Hz to 20kHz the FBT VENTIS 112A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 133dB. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class D topology, operating with extremely low THD; for the HF stage, a 200 W RMS performance is delivered via a meticulously crafted Class H/AB design. DSP on-board is both user friendly and powerful; a total of 6 pre-optimised settings are available, plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Constructed in 0,59″ birch plywood, the FBT VENTIS 112A include two aluminum handles and 6 x M 10 suspension points.The optional mounting bracket allow the FBT VENTIS 112A speaker to be surface mounted on walls or ceilings.

  • 2-way bi-amplified bass reflex design
  • Biamped: 700W RMS/LF and 200W RMS/HF
  • DSP with graphic display
  • 0,59″ birch plywood scratch resistant enclosure
  • High efficiency switch mode power supply
  • Control panel features balanced XLR/Jack combo input, XLR M out, 2 x volume, RCA stereo input, DSP with rotative encoder and push
System Type
Internal amplifiers
max. 700W I 200W RMS
Input Impedance
22 kOhm
Frequency Response
48Hz - 20kHz (@-6dB)
Maximum SPL cont/peak
126 / 133dB
80°H x 50°V rotatable
AC Power Requirement
387.5 x 650 x 380 mm

Artnr. 703515

FBT VN-C 112

Cover for Ventis 112


Artnr. 703523

FBT VN-U 112

Wall mount Ventis 112 in horizontal