FBT MITUS 118FSA

The MITUS 118FSA is a cardioid arrayable and flyable subwoofer. It is designed and manufactured by FBT’s renowned engineers and artisans, the Mitus 118FSA is a prime example of audio perfection with ergonomic innovations. The Mitus 118FSA is a hybrid loaded 18″ neodymium subwoofer designed to suspend from a MT-F 212 flybar either facing forward (FSA model) or rearward (FSCA model).

• Compact hybrid band pass cardioid-arrayable subwoofer. Hybrid configuration permit to obtain extension and speed of vented with high SPL and acoustic filtering of band pass
• Suspension hardware fully compatible with MITUS206La allowing the enclosure to be suspended front (FSA model) or rear-firing (FSCA model) for easy cardioid configurations
• Large area laminar-flow port to ensure no power compression and very low port turbulence
• For cardioid configurations with one SUB rear-firing and two sub front-firing, more than 15dB SPL rejection can be obtained behind the array
• 18″ (460mm) custom B&C neodymium magnet high excursion woofer with a 3.5″ (88mm) voice coil
• Frequency Response from 33Hz to 1Hz
• Class D amplifier delivering 1200WRMS
• Switch mode power supply
• DSP with 8 presets, cardioid and with infra configurations, delay
• Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, ground-lift
• 5/8″ (15mm) birch plywood enclosure, scratch resistant black paint
• Low frequency extension cabinet for the MITUS 206LA line array for flying or ground stacked configurations
• Very low profile for a 18″ size woofer