FBT MODUS 4805LA
2-way Bass reflex Active Line array -4x8"+4x1"- 600Wrms+3
Artnr. 703766
Flera modeller tillgängliga
Modus 4805LA
The Modus 4805LA is part of the Modus Constant curvature system it features 4 x 8″ neodymium magnet woofers and 4 x 1″ (1.7″VC) neodymium magnet HF compression drivers and a Vertical dispertion of 5 degrees x 90 degrees horizontal.. Built in amplifier delivers 600/300w RMS 137dB SPL
- 5° vertical dispersion
- 2 way powered bi-amplified true line array, bass reflex design
- 4 x 200 mm (8″) custom neodymium woofers with 50mm voice coil (2″)
- 4 x 25 mm (1″) neodymium compression drivers and 44mm voice coil (1.7″)
- 58Hz – 20Khz frequency response
- class D 600 Wrms amplifier for LF
- class D 300 Wrms amplifier for HF
- High efficiency switching power supply
- DSP on board with 8 EQ presets, +/- 5db HF level control for accurate amplitude shading
- control panel with XLR input and link, volume, presets, HF level, HP filter, ground-lift
- 90° horizontal waveguide with near flat wavefront up to 18Khz
- 18 mm (3/4″) birch plywood enclosure, with handles and mechanical hardware for suspension
- Mechanical hardware for suspension with 10:1 safety factor
Configuration
Line Array
Frequency response
58Hz - 20kHz
Low frequency woofer
4x 8
High frequency driver
4x 1
Maximum SPL cont/peak
130/137dB
Dispersion
90 x 20 (HxV)
Input impedance
22kohm
Input connector
XLR with link out
AC Power requirements
640VA
Built-in amplifier LF/HF
600/300w RMS
Built-in amplifier peak LF/HF
1200/600W
Net Dimension (WxHxD)
727 x 510 x 405mm
Power cord
5m PowerCon True1
Net Weight
48kg
